Piedmont Plastics carries industrial PVC type I for corrosion resistant valves and fittings, chemical processing equipment, pool parts, and lab equipment.
PVC Type 1
Durable, chemical-resistant PVC Type I: versatile for corrosive environments.
-
Fabrication Support
Cut-to-Size, Routing
-
Local
Inventory Stocking
-
National
Inventory Access
Your Branch: Columbus
Zip code: 43229 |
Product Overview
Widely used for:
Performance Characteristics:
Typical Properties of PVC Type 1
Common Properties
- Common Brand Names VINTEC® 1, GF Harvel Type 1 PVC
- Typical Thickness Size 0.0625 - 4 in
- Typical Lengths 48 - 120 in
- Typical Widths 24 - 60 in
- Friendly Names Rigid PVC, Type I PVC, Chemical Resistant PVC
- Common Profiles Sheet, Rod
- Typical Rod Diameter 0.25 - 9 in
- Typical Rod Length 24 - 120 in
Physical Properties
- Density 0.90 - 1.45g/cm³
- Water Absorption (24 hours) 0.01 - 0.60%
- Moisture Absorption at Equilibrium 0.10 - 0.70%
- Linear Mold Shrinkage 0.2 - 2.0%
- Melt Flow Index 0.2 - 100g/10 min
Electrical Properties
- Dielectric Strength 16kV/mm
- Dielectric Constant 3.2
- Dissipation Factor 0.02
- Volume Resistivity 10^15Ohm·cm
- Surface Resistivity 10^13Ohm/sq
- Arc Resistance 120sec
- Comparative Tracking Index (CTI) 600V
- Thermal Coefficient of Dielectric Constant N/A1/°C
- Electrostatic Discharge (ESD) Sensitivity Not susceptible
- Breakdown Voltage 40kV
Mechanical Properties
- Hardness 110Rockwell R
- Tensile Strength, Ultimate 52MPa
- Tensile Strength, Yield 44.8MPa
- Elongation at Break 2.5%
- Elongation at Yield 3%
- Modulus of Elasticity 2760MPa
- Flexural Yield Strength 96MPa
- Flexural Modulus 2760MPa
- Compressive Yield Strength 70MPa
- Bearing Yield Strength 24MPa
- Shear Strength 22MPa
- Izod Impact, Notched 1kJ/m
- Izod Impact, Unnotched 3kJ/m
- Gardner Impact 34J
- Falling Dart Impact 30J
- Instrumented Impact Total Energy 85J
Thermal Properties
- CTE, linear 5.4µm/m°C
- CTE, linear, Transverse to Flow 8.1µm/m°C
- Deflection Temperature at 0.46 MPa (66 psi) 70°C
- Deflection Temperature at 1.8 MPa (264 psi) 56°C
- Vicat Softening Point 83°C
- Flammability, UL94 V - 0
- Max Continuous Operating Temperature in F 140°F
- Minimum Operating Temperature in F - 50°F
- Thermal Conductivity 0.19W/m°C
Regulations
- D635 Self Extinguishing
- RoHS Compliant
Common Applications
Tanks and Storage
Add temporary protection to floors and walls with lightweight polypropylene ...
Thrust Washers
Thrust washers made from materials such as nylon and UHMW polyethylene allow ...
Valves and Fittings
From plumbing to food manufacturing, most industries require durable, ...
Safety Partition
In environments where separation is critical to maintaining the safety and ...
Common Industries
Machine Shops
Piedmont supplies machine shops with a wide range of plastics, including acetal, ...
Power Generation
General engineered plastics are used to make parts for power generation ...
Building and Construction
Piedmont Plastics provides high-quality plastic materials for building, ...
Medical Equipment
Piedmont Plastics offers an extensive line of plastics for medical equipment ...
Electrical
Piedmont Plastics is a distributor of plastics for electrical components ...
Chemical Manufacturing
Piedmont distributes plastic products with high impact strength, broad service ...
Food Processing and Handling
Piedmont Plastics offers a full inventory of NSF, FDA, USDA, and 3A-Dairy ...
Talk to An Expert In
Columbus
Zip code: 43229 |
460 Schrock Road
614-985-0745
